New Schwing long reach vacuum excavators for maximizing your work area without repositioning. The long reaching boom provides 126’ of vertical, 115’ horizontal reach and 89’ of below grade reach with the tip hose to expand your scope of work from one setup position. Cover over one acre without repositioning. These vacuum excavators are manufactured in the United States by Schwing, a company with 80 years of boom technology and experience.
Schwing’s versatile long reach vacuum excavators utilize a four-section Roll & Fold® boom with 620 degrees of total articulation and 740 degrees of boom rotation to reach the most demanding job site applications. Primary applications include hydro excavating (no dig) to assist in carefully unearthing around sensitive areas such as petroleum digs or areas with underground cables or piping. Other key applications include flat roof rock removal and holding tank cleanout. Now it is possible to reach roof tops from a setup at ground level and holding tanks that are impeded by obstacles.
These USA manufactured vacuum excavators provide precision boom control with Schwing’s wireless proportional controls to easily manipulate the boom into tight working areas. Schwing’s controls are linked with a wireless remote control radios to monitor and help ensure the safety of the vacuum and its operator even when hundreds of feet from it.
Schwing’s new long reach vacuum excavators operate using a powerful Robuschi Blower with 6,176 SCFM @ 28” HG that is powered by a 600 HP rated transfer case. In conjunction with a formidable water pump that is rated at 18 gpm @ 4,000 psi and a 750-gallon water tank, the Schwing vacuum excavator can take on a wide variety of jobs. It also includes a 420k BTU diesel fired 12v boiler to work in cold weather climates that often have various degrees of frost-laden terrain.
Schwing also offers an optional Long Reach Vacuum Extension truck that provides all the benefits of Schwing’s long reaching boom, but must be connected to a secondary vacuum excavator source. This vacuum excavator source requires a minimum 5,000 SCFM, positive displacement blower. High-pressure water and air connections are provided at the rear of the Schwing Long Reach Vacuum Extension truck.
Contact Information
Dan Prill, Marketing Communications
Schwing America Inc.
5900 Centerville Road
St. Paul, MN 55127 USA
651-653-5439 Direct
[email protected]